{"product_id":"ti5-cra-ri70-90-lightweight-joint-module","title":"Ti5 CRA-RI70-90 Lightweight Joint Module","description":"\u003cp\u003eThe CRA-RI70-90 is the heavier-framed member of the Ti5 70-series: the same drive as the CRA-RI70-80 in a bigger housing. Base build mass is 1.27 kg against the 70-80's 0.9 kg, 1.5 kg against 1.11 kg for the extended body, and 1.3 kg against 0.99 kg for the EtherCAT-capable build.\u003c\/p\u003e\u003cp\u003eApart from mass the two frames share the same numbers. Gear ratios of 51, 81, 101 and 121 give 69, 91, 102 and 108 N·m peak torque at 77, 48, 40 and 30 RPM; allowable torque at average load runs from 42 N·m to 61 N·m; backlash is 20 arcsec on the two lower ratios and 10 arcsec on the two higher ones; and the platform is 500 W at 24–48 V with 6.1 A rated current, 8.4 A maximum continuous current, a 0.118 N·m\/A torque constant and an 18 mm hollow shaft. Housings here are a half-millimetre longer at each build. The two have identical performance figures, so the choice is a mechanical-envelope decision and it is confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eThree builds are fully specified. The base CRA-RI70-90-PRO-2-XXX is 73.5 mm at 1.27 kg with a 16-bit encoder on CAN. The -B build extends to 92 mm at 1.5 kg, with rotor inertia rising from 596.4 to 746.7 g·cm². The -2E-EC build stays at 73.5 mm and 1.3 kg and adds a 16\/18-bit encoder option with EtherCAT alongside CAN for synchronised multi-axis control. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eAt this size the module is aimed at the joints that carry a machine's weight — hips, shoulders and knees on human-scale limbs, the proximal axes of a manipulator — where one serviceable unit per joint is worth the extra frame mass. It is a component: structure, controller, power and software are the integrator's.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame 70-frame drive, heavier housing:\u003c\/strong\u003e Gear ratios, torque and speed tables, backlash and electrical ratings match the CRA-RI70-80's figures; the difference is mass, 1.27 kg against 0.9 kg for the base build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e108 N·m peak at the top ratio:\u003c\/strong\u003e 51:1 gives 69 N·m peak at up to 77 RPM, 81:1 gives 91 N·m at 48 RPM, 101:1 gives 102 N·m at 40 RPM and 121:1 gives 108 N·m at 30 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e61 N·m allowable at average load:\u003c\/strong\u003e The two higher ratios are rated for 61 N·m at average load and 50 N·m at a 2000 RPM input speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 W electrical platform:\u003c\/strong\u003e All builds run from 24–48 V at 6.1 A rated and 8.4 A maximum continuous current, with a 0.118 N·m\/A torque constant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree fully specified builds:\u003c\/strong\u003e 73.5 mm at 1.27 kg for the base unit, 92 mm at 1.5 kg for the extended -B body, and 73.5 mm at 1.3 kg for the -2E-EC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 mm hollow shaft on every build:\u003c\/strong\u003e Cabling passes through the joint axis, which keeps a serial arm's harness inside the structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFourth build confirmed at quote:\u003c\/strong\u003e The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Ti5 Robotics","offers":[{"title":"Default Title","offer_id":67847207452962,"sku":"Ti5-Robotics-Joint-Module-70-90","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/ti5-robotics-joint-module-70-90-1.png?v=1794972752","url":"https:\/\/robotixmarket.es\/en\/products\/ti5-cra-ri70-90-lightweight-joint-module","provider":"Robotix Market Europe","version":"1.0","type":"link"}